Iai-america XSEL Ethernet Manuel d'utilisateur télécharger pdf (Page 54)

- 48 -

Setting requirement

A: Required (function selection)

B: Required (network environment, etc.)

C: Checked (As a rule, the default value

on the parameter list must be used.)

Modbus/

TCP

IAI protocol

B/TCP

Transmission by

SEL program

No.

Parameter

name

Default

value

(reference)

Input range Unit Remarks

C C C 125

Network

attribute 6

1E32H 0H~FFFFFFFFH

Bits 0 to 7: Module initialization check timer value when Ethernet

is used (100 msec)

Bits 8 to 15: Module initialization check timer value when

Ethernet is not used (100 msec)

Bits 16 to 23: Increment of “PC/TP reconnection delay time upon

software reset” when Ethernet is used (sec)

C C C 126

Network

attribute 7

7D007D0H 0H~FFFFFFFFH

Ethernet TCP/IP message communication attribute

Bits 0 to 15: Min timeout value (msec)

Bits 16 to 31: Mout timeout value (msec)

C C C 127

Network

attribute 8

5050214H 0H~FFFFFFFFH

Ethernet TCP/IP message communication attribute

Bits 0 to 7: CONNECT_TIMEOUT (sec) * Changes to this

setting are prohibited.

Bits 8 to 15: Connection retry interval (sec) (IAI protocol B/TCP)

Bits 16 to 23: Send timeout value (sec)

Bits 24 to 31: IAI protocol B-SIO non-communication check timer

value (sec) (IAI protocol B/TCP connection trigger)

C 128

Network

attribute 9

0H 0H~FFFFFFFFH

Ethernet TCP/IP message communication attribute

Bits 0 to 15: SEL server open timeout value (sec)

(No timeout check when “0” is set)

A A A

129

Network

attribute 10

0H 0H~FFFFFFFFH

Ethernet operation requirement

Bits 0 to 3: Remote I/O

0: Do not use

1: Use Modbus/TCP (EXCEPTION status invalid)

2: Use Modbus/TCP (EXCEPTION status (upper two digits

of error number) valid)

3: Use EtherNet/IP (main application version 1.05 or later)

* Handle each error according to the error level by

referring to the explanation of error level in the

operation manual.

Bits 4 to 7: TCP/IP message communication

0: Do not use

1: Use

Bits 8 to 31: Not used

130

Own MAC

address (H)

Reference only

(HEX)

Only the lower two bytes are valid.

131

Own MAC

address (L)

Reference only

(HEX)

B B B

132

Own IP

address (H)

192 1~255

* Setting of “0” and “127” is prohibited.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Commentaires sur ces manuels

Pas de commentaire

Iai-america XSEL Ethernet Manuel d'utilisateur Page 54

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Iai-america XSEL Ethernet