Iai-america IX-NNW3515H Manuel d'utilisateur télécharger pdf (Page 62)

8. Installation Environment and Storage Environment

Dust-proof/splash-proof items

y Will not become immersed in liquid.

y Free from fine shavings generated by grinding, etc.

y Free from cutting oil.

y Free form mist of cutting fluid, grinding fluid or other liquids containing sulfur.

About IP65

IP: International Protection rating. IP is a symbol of protection characteristics.

6: Degree of protection against intrusion of solid matter

 Powder dust will not enter.

5: Degree of protection against intrusion of water

 No harmful damage will be sustained when hit by water jet directly from any direction. Spray fresh

water from all directions for 1 minute per 1 m

of surface area of the cover, for a total duration of at

least 3 minutes. The distance from the nozzle to the machine shall be adjusted to a range of 2.5 to 3 m,

injection pressure to 30 kPa, and flow rate to 12.5 L/min.

 Do not use the robot in an environment exceeding the protection degrees against water/powder dust

specified for the robot. Doing so may cause water or powder dust to enter, resulting in shorter robot life,

lower operation precision or malfunction.

 Supply air of the specified pressure from the air supply port for air purge provided on the side face of the

base. If air is not supplied, dust-proof/splash-proof performance will drop.

 Supplied air shall be clean, dry air free from compressor oil, etc., while the filtration level of the air filter

shall be 10 m or less and atmospheric dew point shall be -20C or below.

 The robot controller is not dust-proof or splash-proof.

 Please contact IAI regarding the robot’s splash-proof performance against liquids other than water.

 The bellows may change color depending on the use environment, but discoloration does not affect the

robot’s dust-proof/splash-proof performance.

WarningDanger

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 109 110

Pas de commentaire

Iai-america IX-NNW3515H Manuel d'utilisateur Page 62