Iai-america IX-NNW8040 Manuel d'utilisateur télécharger pdf (Page 51)

6. Inspection/Maintenance

(5) Affix the cover (base) using the hex bolts [1] and sealing washers (six pieces each) (tightening torque:

0.74 N-m).

z When installing the cover (base), be careful not to pinch the cables inside.

z Disassembling the cover provides opportunities for water and powder dust to enter the robot.

Always disassemble the cover in an appropriate environment where water/powder dust will not

enter the robot.

[1] 6 - M3 x 6

Caution

ffix one side of the cover (base) first,

and then tighten the mounting bolts on

the opposite side while pressing the

cover against the curve along the

contact surface of the base.

Confirm that no gaps remain between

the cover (base) and gasket.

Sealing washer

Cover (base)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 87 88

Pas de commentaire

Iai-america IX-NNW8040 Manuel d'utilisateur Page 51