Iai-america IX-NNC3515 Manuel d'utilisateur télécharger pdf (Page 43)

6. Inspection/Maintenance

(5) Tighten the two cap screws (M4 x 8) [4] to affix the cap.

(6) Tighten the bellows clamp using a Phillips screwdriver.

(7) Turn the cap to confirm that the bellows rotate smoothly.

z Check the marking tubes to prevent improper connections.

z Be careful not to bend the air tubes.

z Be careful not to pinch the cables.

z Place the wires neatly in the upper space without letting them rest on top of one another. Do not

forcibly tighten the screws with the panel still floating.

z Check if the connectors are fully inserted.

z If the cover is removed, absolute reset must be performed again for the rotational axis and vertical

axis. (See 6.4, “Absolute Reset Procedure.”)

[4]

Phillips screwdriver

Turn the cap to check if the

bellows are not twisted.

Caution

Cap

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Pas de commentaire

Iai-america IX-NNC3515 Manuel d'utilisateur Page 43