Iai-america XSEL-QX Manuel d'utilisateur télécharger pdf (Page 452)

100

101

428

Appendix

No. Parameter name Default value

(Reference)

Input range Unit Remarks

13 Expanded I/O3 error

monitor (I/O4)

1 0 ~ 5 0: Do not monitor

1: Monitor

2: Monitor (Do not monitor 24-V I/O power-supply

errors)

3: Monitor (Monitor 24-V I/O power-supply errors only)

* Some exceptions apply.

* If 0 (= Do not monitor) or 2 (= Monitor (Do not monitor

24-V I/O power-supply errors)) is selected, a system

error will not generate when a 24-V I/O power-supply

error occurs. To protect the controller, however, the

actual outputs of the digital I/O board will be cut off by a

circuit later.

14 Number of ports using

network I/F module

remote input

0 0 ~ 256 Multiple of 8

15 Number of ports using

network I/F module

remote output

0 0 ~ 256 Multiple of 8

16 Input port start number

when network I/F

module assignments are

fixed

-1 -1 ~ 599 0 + (Multiple of 8) (Invalid if a negative value is set)

17 Output port start number

when network I/F

module assignments are

fixed

-1 -1 ~ 599 300 + (Multiple of 8) (Invalid if a negative value is set)

18 Network I/F module error

monitor

1 0 ~ 5 0: Do not monitor

1: Monitor

* Some exceptions apply.

19 (For extension) 0

20 Input filtering periods 2 1 ~ 9 msec Input signal is recognized when the status is held for

twice the period set by this parameter.

21 For future extension

(Change prohibited)

0 1 ~ 9

22 Remote-I/O-card fieldbus

ready timeout value

2000 0 ~ 99999 msec Timeout check is not performed if “0” is set.

23 Input specification for

detection of

overcurrent/abnormal

power supply for multi-

point DIO external

terminal block

0H 0H ~

FFFFFFFFH

Bits 0 to 3: Standard I/O (I/O1) input specification

Bits 4 to 7: Expanded I/O1 (I/O2) input specification

Bits 8 to 11: Expanded I/O2 (I/O3) input specification

Bits 12 to 15: Expanded I/O3 (I/O4) input specification

(0: Do not input error detection signal

1: Input error detection signal = IN023 in

card

2: Input error detection signal = IN047 in

card

3: Input error detection signal =

IN023/47 in card)

* Set this parameter after confirming the specification

of the multi-point DIO terminal block unit to be

connected.

* Input ports used for error detection input cannot be

used as general-purpose input ports.

1 2 ... 447 448 449 450 451 452 453 454 455 456 457 ... 557 558

Commentaires sur ces manuels

Pas de commentaire

Iai-america XSEL-QX Manuel d'utilisateur Page 452

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Iai-america XSEL-QX